1. Bitboard Kit

1.1. Introduction

Change everything into a “keyboard”! The Bitboard helps to learn the electric circuits, create music and games, and it makes everything to be your creating tools!

1.3. Picture

../_images/Bitboard_Kit_01.png

1.4. Parameter

| Item | Data | | :—-: | :—-: | | Product Name | Bitboard | | Rated voltage | 5V | | Rated current | 15mA | | Power supply interface | Micro-USB | | Number of contacts | 8 | | Programming method | ecode, Scratch | | Size Approximately | 140mm X 76mm | | Net weight | 31g |

1.5. Components List

| Item | Quantity | | :—-: | :—-: | | Bitboard | 1 | | alligator clip cable | 10 | | USB cable | 1 | | Conductive stickers | 1 |

../_images/Bitboard_Kit_02.png

1.6. Quick Start

Programming

1.Go to https://www.ecode.cn/creative/, and click “Events”.

../_images/Bitboard_Kit_06.png

2.Choose when space key pressedblcok, then click right arrow

../_images/Bitboard_Kit_07.png

3.Click “Motion” and choose move 10 steps block.

../_images/Bitboard_Kit_08.png

4.After programming, click the green flag to run it.

../_images/Bitboard_Kit_09.png

1.7. Operation steps

1.Connect the Bitboard with the computer through the USB cable.

../_images/Bitboard_Kit_03.png

2.Connect the buttons and GND ports on the Bitboard with the conductots through the alligator clips.

../_images/Bitboard_Kit_04.png

4.Hold the conductors of the buttons → and GND to complete the closed-loop circuit with your hands.

../_images/Bitboard_Kit_05.png

1.8. Result

Hold the conductors of the buttons → and GND to complete the closed-loop circuit with your hands, you can see the tiger on the stage(in ecode) moving to the right side.