6. Octopus Tilt Sensor(EF04001)¶
6.1. Introduction¶
The Tilt sensor is to measure the levelness of the object based on the tilt switch.
6.2. Products Link¶
6.3. Characteristics¶
The 3-pins ports is easy to plug and play. It can work with micro:bit in 3V.
6.4. Specifications¶
Item | Parameter :-: | :-: SKU|EF04001 Working Voltage|DC 3.0V Power Input|3v-5v Connector Type|Digital Pins Definition|1-Signal 2-VCC 3-GND Response|Quick to response with high sensitivity Circuit|Simple Stability|Stable and durable
6.5. Outlook and Dimensions¶
6.6. Quick to Start¶
Connection diagram¶
Connect to P1 port as the picture shows.
Take sensor:bit for example
Program as the picture shows
Set the P1 port to a higher level to initialize the module. If the detected value is 0 and the the digital read pins is 0, the icon is shown on the screen. Or it shows a box.
Reference¶
Links:https://makecode.microbit.org/_WMwRtRXFe2tw
You can also download it directly below:
Result¶
When the tilt angel is changed, the icon or rectangle is shown on the micro:bit.