11. Case 05: The Calendar

11.1. Introduction

The calendar is a publication for daily use, recording dates and other relevant information. The creative combination of calendar and pen holder is not only practical but also saves space on the desktop.../_images/tooca-laser-1-case-05-01.png

11.2. Materials Required

TOOCA laser 1

3mm Plywood

11.3. Relevant parameters

|Model|TOOCA Laser 1| |:——-:|:——-:| |Material of consumables|Basswood board| |Thickness|2.8mm| |Power|100%| |Speed|240mm/min| |Times required to be engraved/cut|3|

Note: This case takes a 2.8mm basswood board as an example. If you need to use different thicknesses or use different materials, please modify the drawing by yourself and refer to the Recommended parameter modify the parameters of the software.

11.5. Effect Show

../_images/tooca-laser-1-case-05-01.png

../_images/tooca-laser-1-case-05-02.png

11.6. material data

More detail about the material：laser cutting material，Laser engraving material

Welcome to join the Laser Engraving Cutter Creative Sharing Community to share your creativity.