10. Octopus Touch PAD Sensor(EF04011)¶
10.1. Introduction¶
Touch PAD Brick is a sensor module mainly through the capacitive touch TTP223-BA6 charge IC and the body of pressure, ceramics, glass and other dielectric materials, and the charge level is used to detect small changes in a touch switch of a sensor module.
10.2. Products Link¶
10.3. Characteristics¶
The 3-pins ports is easy to plug and play.
10.4. Specifications¶
Item | Parameter :-: | :-: SKU|EF04011 Working Voltage|2.0V~5.5V Anti-interference|Stable operation is ensured under strong external disturbances Sensibility|Sensitivity can be externally adjusted through 0~50pF CS capacitor Choice Model|Two choices Output Mode|Two Choices High and low output mode|Can be selected(AHLB pins) Insulation characteristics|Insulating medium between 0MM~10MM
10.5. Outlook and Dimensions¶
10.6. Quick to Start¶
Materials used and connection diagram¶
1 x micro:bit
1 x sensor:bit
1 x Touch PAD Brick
Connect to the P1 port.
Add Package¶
Click “Advanced”in the choice of the MakeCode to find more choices.
Click “Extensions”, search “iot”in the dialog box and then download it.
Program as the picture shows¶
Reference¶
links: https://makecode.microbit.org/_UJELf0aERP9z You can also download the links below:
Result¶
The relevant information is shown on the micro:bit.