5. Case 02: Helicopter¶
5.3. Materials Required¶
5.6. Programming¶
5.6.1. Prepare the programming¶
Steps for preparation please refer to: Arduino 3 in 1 Breakout Board
5.6.2. Sample Projects:¶
// Language ArduinoC
#include <NezhaA.h>
NezhaA nezhaA; //Create an instance of Nezha Catogory
void setup() {
nezhaA.begin(); //Initiliaze the buzzer, motor, servo and light
nezhaA.setMotorSpeed(M1, 100); //Set the speed of the motor connecting to M1 at 100%
}
void loop() {
}
5.6.3. Result¶
After powering on, the propeller starts driving.