9. Case 03: The Elk¶
9.1. Introduction¶
The elk is a large herbivore with a black longitudinal stripe on the back of the neck and a brownish-white belly and rump, and after September the body fur is replaced by a longer, thicker gray winter coat.
9.3. Relevant parameters¶
|Model|TOOCA Laser 1| |:——-:|:——-:| |Material of consumables|Basswood board| |Thickness|2.8mm| |Power|100%| |Speed|240mm/min| |Times required to be engraved/cut|3|
Note: This case takes a 2.8mm basswood board as an example. If you need to use different thicknesses or use different materials, please modify the drawing by yourself and refer to the Recommended parameter
modify the parameters of the software.
9.5. Effect show¶
9.6. material data¶
More detail about the material:laser cutting material,Laser engraving material
Welcome to join the Laser Engraving Cutter Creative Sharing Community to share your creativity.