12. Case 09: The Crawl Robot¶
12.3. Materials Required¶
12.6. Programming¶
12.6.1. Prepare the programming¶
Steps for preparation please refer to: Arduino 3 in 1 Breakout Board.
12.6.2. Sample Code:¶
// Language ArduinoC
#include <NezhaA.h>
NezhaA nezhaA; //Create an instance of Nezha category
void setup() {
nezhaA.begin(); //Initiliaze the buzzer, motor, servo and light
nezhaA.setMotorSpeed(M1, 100); // Set the speed of the motor connecting to M1 at 100%
}
void loop() {
}
12.6.3. Result¶
After powering on, the robot crawls forward.