36. case 33 access denied¶
36.1. Access Denied! A Door Entry Tutorial¶
- Enhancing door security with micro:bit. This tutorial was written by Sean Lew, from the Singapore University of Technology and Design, during his summer internship with us in 2018.
36.2. Products Link¶
36.3. Goals¶
- Build your own wireless door security!
- Setting up alerts for any intruders or unlocked doors!
36.5. Step 1 – Setting Up!¶
- Slot one of the micro:bit into the breakout board.
- Connect the Buzzer to Pin 0 of the breakout board and the crash sensor to Pin 1.
- Before moving on to Step 2, make sure you download the “tinkercademy-tinker-kit” package.
Step 2 – Code away!¶
- Drag these set of codes into your makecode platform and download it into the micro:bit connected to your breakout board.
- Give the crash sensor a few press to see if your code is working correctly!
Step 3 – Almost there!¶
- Download this set of codes for the second micro:bit (receiver).
- Now give test out the crash sensor to see if the receiving micro:bit is working correctly!
- Now that you have set up your very first wireless door security, you can try it with more than just 1 door!
- Feel free to also add add other form of alerts on the receiving micro:bit to enhance your own security.