3. Assembly¶
3.1. Introduction¶
Hello, now it’s time for us to do the assembly. We’re going to assemble the Ring:bit smart car step by step in this wiki. Let’s get started with your nimple hands!
3.2. Ring:bit Car V2 Components List¶
First of all, these two pictures below are the parts diagram of Ring:bit smart car, you can first familiarize yourself with the parts style and name, and then check if your kit has all the parts inside.
3.3. Assembly Step¶
Step-1¶
Fisrt, use the tapping screw to fix the servo to the side board.(as below pictures)
Then, use the screw to fix the wheel to the servo.(as below pictures)
Step-2¶
Use the rivet to install the castor wheel on the chassis.
Step-3¶
Assemble the front board, the back board and the base board to the side board as below picture.
Step-4¶
Use the binding post to fix all installed components.
Step-6¶
Connecting wire as below pictures, you can connect the pins as you wish but make sure the programming be consistent with the connectons.
Note: No matter which connection you use, make sure the yellow line connects with the number pins(0/1/2).